Friday, June 4, 2021

Tips to remove rust from Two-wheeler

 Here are a few tips to remove rust from your two-wheeler, also make sure to buy two-wheeler insurance online.

Tip 1: This method is more like a DIY and not going to cost you much. Take that diet coke from your refrigerator and grab that aluminum foil from your kitchen drawer. Now soak the aluminum foil into the coke and rub the rust using the upper side (shiner side) of the aluminum foil. You can do this by pouring the diet coke directly over the rust and rubbing it off using aluminum foil. Do not rub the surface violently. Do it slowly. Finally, wipe the coke clean using a soft cloth.

Tip 2: This method is another DIY and you don't have to spend a penny. Walk right in to your kitchens and grab baking soda, take a glass of water, and a bowl. Mix the baking soda and water. This mixture should not be runny to ensure the consistency is a thick paste. Adding lemon juice to the mixture is optional.

Now find the rusted areas and apply this paste of baking soda, lime juice, and water over it. Leave it undisturbed for 30 minutes. Last method you used aluminum foil which served as an abrasive material. Here you can use a steel wool or brush (toothbrush or any small brush available) to remove the paste off your two-wheeler.

Remove the paste in circular motions. Slowly remove the entire mixture and finish this method using a soft cloth. Register for your Bike insurance online.

Tip 3: This is another DIY to kill your time but you may have spent a few bucks for the chemical rust cleaners.  If you are confused about selecting a cleaner, browse online and read the feedback to know its worth. Most of the cleaners will come with gloves. You may need to invest in eyeglasses.

Since it is chemical being on the safer side before having your hands on it is a preventive measure. Read the instructions given on the rust remover’s manual and follow the steps as mentioned and get rid of the stubborn rust.

Regular Two-Wheeler Maintenance Items

 There are a few maintenance tools for a two-wheeler and owning them will benefit you one or the other day. Continue reading the article to know the common two-wheeler maintenance items. Consider buying two wheeler insurance online.
 
Mechanical gloves: To handle your two-wheeler and its parts, you need to have these mechanical gloves. This can keep your hands from getting dirt and also you are less likely to get hurt.
 
Brush: A nylon and wire brush will help you in getting rid of the dirt that is accumulated in various parts of the bike. You don't need to poke the dirt with your finger or a small stick anymore. The nylon brush will get rid of the dirt without harming any part of the two-wheeler.
 
Pressure Gauge: This should do wonders. You don't have to run to the gas station or to the mechanic to check the tire pressure. Check the tire pressure and inflate the tire yourself and save your time. When you inflate the tires make sure to check the two-wheeler manual to ensure the tire is inflated correctly.
 
Torque Wrench: Your handyman is here. The box will have holders of different shapes and you can use them for different parts of your two-wheeler. A torque wrench will make the task of fastening and removing the bolts and nuts easier.
 
To your surprise torque wrench will not over-tighten the nuts and bolts. Even if it's over-tightened earlier it is a matter of time for it to be released . And nuts and bolts will not be damaged because of the pressure of the torque wrench. You just need to check for the click sound from your torque wrench to confirm it's locked.
 
Screwdrivers: This is the essential tool you should have as a rider. After nuts and bolts, screwdrivers will drive you crazy when trying to remove and fix them. Prefer the screwdrivers that have rubber holding so that you will have the grip to loosen and tighten them. Now that you have screwdrivers, renew the 2 wheeler insurance online.

5 Expert Car Wash Tips

 Ever wondered, “Have I known to wash my car just like the car washing services do, I would have saved millions”? This is a common thought everyone must have when paying the bill for their car wash. This article will help you understand the 5 expert car wash tips and moving forward you will be the expert in making your car super clean.
 
Select the right cleaner: Avoid detergents or soaps that are used in the kitchen to clean your car. They are designed to clean the dishes and not your car. Using them will dull your car’s skin and might strip the paint. Prefer cleaners that are made especially for cars. Also, prefer buying private car insurance.
 
Never let any items touch the ground: You will be using a wet cloth, dry cloth, and a rag to clean your car. Ensure they do not touch the ground during the process. If they accidentally fall, do not use them in your car. Because the tiny particles from the ground will damage your car’s skin. Even though you clean them well the tiny brittle particles will stay in the cloth causing damage to your car.
 
Do the rinsing right: Use two buckets of water. One to clean the dirt and another one to clean your car with fresh water. This way dirt is removed and your car is washed properly. Use two clothes for two buckets. Once you have cleaned the dirt with one cloth, perform the second cleaning with a neat cloth and water.
 
Wash in bright light/ sunlight: Parking your car under sunlight for a long time will damage your car, but washing them in bright sunlight means no harm. This way you can see the dirt properly and your cleaning process will be easy.
 
Use the microfiber towel: This step is to wipe your car dry. Use a microfiber towel, it is soft and does not harm your car. Make sure to renew your private car insurance.